The CP test-station SKIP – 102-2,4 is intended for the equipment of control and measuring points in field conditions. It is made from the steel pipe. The bottom part of a pipe represents a steel square for fixing the SKIP in a ground and for prevention of spontaneous lowering. The top part is made as the box with contacts panel. As additional application, it may be equipped a special cover-board for a spelling of special marks and special chassis for installing BDR-25 block on it. In the bottom part of a column there is an aperture for a supply of a cables. The external surface of a pipe and all metal parts of box are protected by a powder coating.
Also, the SKIP-102-2,4 may be equipped by the “KATRON-PIKET” controllers, for remote control of the protective potential.

The SKIP-MG cathodic protection test-station is intended for the equipment of control and measurement posts in the conditions of a populated area and protection against mechanical damage to gas pipeline devices (cable connectors) that go up to the ground.

It is made of polymer-sand material. A DIN-rail with mounted clamping connectors for connecting measuring and / or drainage cables is mounted inside the housing. The number and type of connectors indicates when ordering.

Modification of the MG differs from the modification of BG in overall dimensions, weight and the number of possible combinations of measuring and power terminals.